Knowledge Base

Getting Started

Once NP-View Server is installed, the application will start automatically. Note that NP-Live has been Rebranded to NP-View Server.  Several of the instructions still correctly refer to NP-Live as we migrate the installation services to the new product names.

If the Linux Administrator wishes to start and stop the application, two helper scripts have been included to aid in these tasks:

• Stop : sudo /opt/np-live/stop_NP-Live.sh
• Start : sudo /opt/np-live/start_NP-Live.sh

‍

Upon initial start, the Welcome screen shows the configuration wizard to guide the Administrator through the remaining configuration steps which include:

1. Authentication
2. Licensing
3. Users

Configure Authentication

The following authentication options are available to configure in NP-View Server.

• Active Directory / LDAP
• Radius
• Local

Active Directory or LDAP

For Active Directory or LDAP authentication we use LDAPv3 TLS over port 389.  If the communication returns an exception, we attempt unencrypted communication. We do not support LDAPS.  Before starting, note that setup requires a dedicated Credential Binding Account (LDAP Administrator). The Credentials Binding Account must be included in at least one of the system groups for NP-View Server to query and link the users.

An example of a properly configured LDAP screen on NP-View is below:

The setup page will allow for the definition of three system groups using a Distinguished Name.  A Distinguished Name (often referred to as a DN or FDN) is a string that uniquely identifies an entry in the Directory Information Tree. The format of a DN is: CN=groupname,OU=grouptype,DC=subdomain,DC=example,DC=com.  Your domain needs to match the DC specified in your DN. For an example DN like above, the domain would be: ‘subdomain.example.com’.

For example:

ldap_group_admin = 'CN=NP-Live Admin, OU=Permissions, DC=ad, DC=np, DC=test'
ldap_group_write = 'CN=NP-Live WorkspaceAdmin, OU=Permissions, DC=ad, DC=np, DC=test'
ldap_group_read = 'CN=NP-Live Viewer, OU=Permissions, DC=ad, DC=np, DC=test'

group_translation = {'Administrator' : ldap_group_admin,
'WorkspaceAdmin' : ldap_group_write,
'Viewer' : ldap_group_read}

Reminder:   The three CN names must be unique or roles will be overlapped in NP-View resulting in features being disabled.

To find the DN on Windows, open a Windows command prompt on your Active Directory server and type the command: dsquery group -name "known group name".

Users assigned to NP-View must login once to get setup within the NP-View database for sharing and transferring of workspaces.  No users exist until after the first login.

Troubleshooting Active Directory Setup

If an error is returned when configuring Active Directory, the steps to troubleshoot are:

Step 1: From your Active Directory server, type the command below in a terminal after replacing the “CN=…” portion with the Distinguished Name of the group you’d like to check:

dsget group "CN=groupname,OU=grouptype,DC=subdomain,DC=example,DC=com" -members

Verify that the output shows the expected list of user(s) in that group. If it doesn’t, check your Active Directory group and user configuration.

Step 2: From your Active Directory server, type the command below in a terminal after replacing the “CN=…” portion with the Distinguished Name of the group you’d like to check, and also replacing USERNAME with your actual username:

dsquery * -Filter "(&(objectClass=user)(memberOf:1.2.840.113556.1.4.1941:=CN=groupname,OU=grouptype,DC=subdomain,DC=example,DC=com)(sAMAccountName=USERNAME))"

If the output is empty, verify that your user in Active Directory has the attribute sAMAccountName set. If not, set it and try the command again. Verify also that the sAMAccountName value matches your AD username value. You can also try to enter the username in the NP-View Active Directory configuration form with the format USERNAME@DOMAIN.

If the output shows the expected list of groups for that user, but NP-View still generates an error, then contact the NP support team.

Radius

Radius authentication requires your server address and secret. Once input, the user can test their connection using their personal login credentials for verification.  Note that for Radius authentication, all users are assigned to the Administrator group.

Local Authentication

NP-View Server provides an internal mechanism for the administration of users.  During setup, the screen will require the user to setup the Administration account by inputting a user ID and password.  This account will be assigned to the Administrator role and will have access to all system features. An example of a properly configured Local Auth screen on NP-View is below:

User Management

NP-View Server provides a User Management function for users assigned to the the Administrator role. It can be accessed in the user menu at the top right of the screen either on the workspace page or from within a workspace.

User Management – Active Directory or LDAP

Clicking User Management will open a window that shows the LDAP setup information. The left half of the screen allows the user to change the NP-View LDAP settings.  LDAP Auth credentials are required to update the information.  The optional email field override is used as the default email address for the Notification Manager if no email address is provided as part of the LDAP credentials.

The right half of the user management screen allows for the testing of each LDAP user and will retrieve their LDAP settings for review.

User Management – Local Authentication

Clicking User Management will open a window that shows the user related information associated with this account, their account details, and their account permissions.

From this window Administrators can edit (pencil icon), delete (x icon) or add user accounts (create new user button).

A user’s ID should be the user’s email address (this will be used for notifications) and an administrator-defined password.  Each user will need to be assigned to a role which will provide the user with system wide access.

1. Administrator – Has access to all users, workspace and system administration functions including managing users and license functions.
2. WorkspaceAdmin – Has access to all workspace administration functions.
3. Viewer – Has read only access to the system.

Reset Authentication

The Administrator can also reset the authentication method entirely by selecting the “Reset authentication system” link. “Reset authentication” only resets the authentication and does not remove any workspaces or data.  Note that workspaces are assigned to user id’s.  If the authentication method (or user id format) is changed, the workspaces will no longer be available to users.  The administrator or workspace admin must utilize the transfer workspace function to assign the legacy workspace to the new user id’s.

Password Reset

• Workspace Admin or Viewer user groups:  Contact your Administrator who can manually reset your password through the User Management function on the system menu (upper right corner).
• Admins: connect through SSH to the NP-View server and remove the file db/auth_provider.cfg inside the NP-View application folder (by default: /opt/np-live).
• Refresh the NP-View web page to show the Welcome screen and reconfigure the authentication.

License and Terms

The Administrator can Show, Upgrade or Renew their license. Licensing terms and legal disclosures are available from the system menu where user management is found.

Configure License Key

After the authentication, the Welcome screen will guide the Administrator through reviewing the EULA and adding the license key. The license key should have been sent to you by email and also posted on the Network Perception portal. If you haven’t received a key, please send a request to support@network-perception.com. Renewed or upgraded license keys can only be installed from the home screen (not from within a workspace) by members of the Administrator group.

Additional Configuration Features

Configure Automatic Updates

NP-View Server can automatically download new releases and update itself if you select “Automatically check for updates”.  Alternatively, you can select “Update NP-View” from the upper right menu or update offline using the following steps:

1. Download the latest release from the Network Perception portal.
2. Copy the release file to the NP-View Server using SCP or WinSCP
3. Connect to the NP-View Server shell using SSH and execute the release file with the command sudo sh NP-View_server_installer.sh

Configure Shutdown and Startup Options

To speed performance on startup, NP-View terminates background processes that are running when the system is gracefully shutdown and clears out all tasks and jobs.  If any processes remain upon startup, they are also terminated. To change the configuration,

• stop the NP-View Server application.
• in the docker-compose.yml file for the manager change cancelTasksStartup=True to cancelTasksStartup=False
• in the docker-compose.yml file for the manager change clearRqStartup=True to clearRqStartup=False Note that the previous setting must also be set to True for this operation to work.
• start the NP-View Server application.

Configure User Timeout

The system can be configured automatically time out a user after a period of idle days.  The default is set to 30 days. To change the configuration,

• stop the NP-View Server application.
• in the docker-compose.yml file for the webserver\environment service, change sessionLengthDays=30 to any positive floating point number representing elapsed days. For Example:
  • 0.5 = 12 hrs
  • 1.5 = 36 hours
  • 30 = 720 hrs.
  • If set to 0, user timeout will default to 30 minutes.
• start the NP-View Server application.

Timeout for connectors is 1 day and cannot be changed. Also, the timeout value is not static and will be overwritten by the next software update. Prior to restarting after an update, the timeout needs to be reset to the value of choice.

Configure Devices within a Custom View

The system can be configured to allow for more devices within a custom view.  The default is set to 25 devices. To change the configuration:

• stop the NP-View Server application.
• in the docker-compose.yml file for the
  • services : manager : environment, change devCountLimit=25 to a positive integer.
  • services : bgmanager : environment, change devCountLimit=25 to a positive integer.
  • services : webserver : environment, change devCountLimit=25 to a positive integer.
• start the NP-View Server application.

Note: The limit is not static and will be overwritten by the next software update. Prior to restarting after an update, the limit needs to be reset to the value of choice. Note: NP has only tested the system to the default limit. Raising the limit is at the user’s risk as unintended consequences including data loss and the system exhausting system resources may occur.

Configure A Static IP Address on your Linux Server

To set a static IP address for your NP-View Server, follow the instructions in this document.

‍

This section describes how to update the NP-View Server application and the underlying components if the OVF was used for the initial installation.

Updating the NP-View Server Application

To update an existing NP-View Application, the steps are:

1. Download the latest release Linux Installer Release (not the .OVF) from the Dragos Portal and copy it onto your NP-view server using SCP (or WinSCP from a Windows client)
2. Login onto the NP-View server using SSH (or Putty from a Windows client)
3. Get root permissions using the command: sudo -i
4. Prior to installing the new version, it is recommended to make a backup of your database (see below)
5. Execute the new NP-View release file using the command: sh NP-View_installer.sh  (where NP-View_installer.sh is the name of the new release file downloaded in step 1).
6. Follow the guided steps of the installer, which will automatically start NP-View once the update is complete.
7. Connect to the user interface of NP-View using your web browser and check in the bottom-left corner of the home page that the version number matches the new release

Updating the NP-View Application to version 5 and above

Prerequisites

• Please update your current version of NP-View to version 4.3.5. Both Server and Desktop must be on this version before starting your upgrade.

For NP-View Server:

• Verify there is sufficient disk space for the upgrade (3x size of Redis db).
• If not follow log cleanup procedure listed in KB (~250MB possible).
• If still insufficient space, disk space will need to be added before upgrade.
• Verify all users are logged out of the system to not lose data during update.

Back-Up NP-View database

NP-View Desktop

1. Copy the 4.3.5 database folder to a safe location. This will allow you to keep a back up 4.3.5 in the case you would want to revert back to 4.3.5some text
   • C:\Users\<name>\AppData\Roaming\NP-View\db
2. Download NP-View from the portal and install.
3. Starting the application may take longer than usual as a one-time database maintenance operation is being performed.

NP-View Server

Option 1:

1. SSH as the root user to Terminal of NP-View server
   • ssh root@<ip-of-guest-os>
   • If needed sudo -i or sudo su will give you admin privileges once you are logged in.
2. Move to the NP-View (np-live) app directory
   • cd /opt/np-live
3. Stop NP-View
   • sh ./stop_NP-Live.sh
4. The db directory contains all of the NP-View data. Create a tarball of the directory
   • tar -czf np-view-v4.3.5-db-backup.tar.gz db
5. Move the file to a safe location.
   • Note: This file will allow you to revert back to 4.3.5.

Option 2 (This option is only available if your server is a VM):

• Your server admin can take a snapshot image of the server as a restore instance. This tends to be easier and quicker for most of the customers that we have worked with.

Once you have a back up and have updated to 4.3.5, please download version 5+ and follow the instructions listed in the above section "Updating the NP-View Server Application".

NP-View Server Migration

Prerequisites

• Follow the instructions above to update the NP-View CentOS server to the latest NP-View version.
• Create a VM using the latest version of the NP-View Server OVF.
• Both Servers need to be running to perform the migration.
• Users should be logged out of NP-View and close any active session before restoring.

CentOS Migration to Ubuntu for NP-View Server

1. Use backup and restore script.
   • sudo -i (This should take you to the root folder)
     • Enter credentials if prompted.
   • To run shell script: /opt/NP-Live/NP-View_backupand_restore.sh
     • There will be 3 options when using the script.
       • Backup
       • Restore
       • Exit
   • The script will check disk space when creating the backup.
   • The script will notify you if the storage is full and stop running.
2. Move the CentOS tar file to the Ubuntu server’s root directory.
   • sudo -i (This should take you to the root folder)
   • Enter credentials if prompted.
   • To run shell script: /opt/NP-Live/NP-View_backupand_restore.sh
     • Select restore
     • The script gives a final warning before running.
     • The script checks if the docker containers are running.
3. Once the script is completed it will notify you.
   • Connect to the web interface and verify data is transferred.
   • If you are unable to connect to the web interface restart NP-View service once the upgrade is complete.

Get Version API call

To check the version update your server URL to the following

https://<np-view_server_address>/version

Backing up the NP-View Server Database Manually

1. Stop the NP-View Server (you can use the script /opt/np-live/stop_nplive.sh)
2. From the NP-View Server folder (by default: /opt/np-live/, run the command: tar -zcf db_backup_$(date '+%Y_%m_%d').tgz db (this command may take few minutes to complete)
3. Run the new release installer, which will update the containers and then launch NP-View Server

‍

Updating Linux Ubuntu and Docker

(Version 5 and up installation with the OVF)

We will be providing update packages for Ubuntu and Docker. Please go to the following page for more information:

https://www.network-perception.com/kb/ubuntu-and-docker-update-packages

Updating Linux CentOS Ubuntu and Docker

‍CentOS is now EOL as of June 30, 2024. We highly recommend customers to transition to Ubuntu.

‍

If the OVF was used for the initial installation, that package included the CentOS 7 operating system and Docker. These applications must be updated separately from the NP-View Server Application using the below instructions. The instructions cover NP-View Servers that have internet access and those that do not have internet access.

Updating when the NP-View server has internet access:

– stop NP-View
cd /opt/np-live/
./stop_NP-Live.sh

– run all updates
yum update -y

– reboot server
reboot

Updating when the NP-View server does not have internet access:

If NP-View server is installed in an environment that does not have internet access, a separate Centos 7 server with Docker that has internet access is required to create the update package. All commands below are case sensitive.

Network-Perception uses this mirror for CentOS updates and this mirror for Docker updates

Centos 7 that is online:

– make sure you are root
sudo su -

– create packages directory
cd /root/
mkdir packages
cd packages

– download all packages
yum list installed | awk {'print $1; }' | tail -n +3 | xargs yumdownloader

– you should see docker included in the output list.

– compress archive (capital -C is important)
tar czf /root/packages.tar.gz *.rpm -C /root/packages/

– Copy packages.tar.gz to the offline server. The user can use the below command to scp:
scp packages.tar.gz root@ipAddress:/root/

Centos 7 that is offline running NP-View:

– make sure you are root
sudo su -
– stop NP-View
cd /opt/np-live/
./stop_NP-Live.sh

– create directory and extract the archive
cd /root/
mkdir packages/
mv packages.tar.gz packages/
cd packages/
tar -xf packages.tar.gz

– install all updates:
yum -y localinstall *.rpm

– reboot server
reboot

– now everything is up to date on the offline server.

If you get any docker swarm errors:

– make sure you are root
sudo su -

– leave and join swarm cluster
docker swarm leave --force && docker swarm init

‍

Change Management provides the Compliance Team (Compliance Officer, Compliance Analysts) with capabilities that allow for:

• Transitioning from point-in-time risk assessment to 24/7 with automated notification.
• Automating the change review process using ticketing system integration and sandboxing.
• Leveraging “time machine” to navigate through the network evolution and compare points in time.

Transition to 24×7 Monitoring

Connectors facilitate the configuration of connections to poll devices on a schedule, importing the latest configurations for analysis and automatically analyzing the information within selected workspaces to identify changes and potential risks.

Automated change review process

Change tracking automatically records configuration changes and provides the user with the ability to review changes made to the system and review the potential impact of the changes.

Network risks related to configuration changes are identified by best practices and user defined rules in the Policy manager.  When a potential risk is identified, it is logged in the “Risks and Warnings” table and assigned a criticality (High, Medium, Low) based on the identifying policy.

Notifications allow users to setup notifications based on complex rules and to have those notifications delivered to multiple services on a schedule to email, syslog or ticketing systems. Notifications can be triggered by configuration changes or network risks.

The Network Sandbox is an isolated workspace that aids network engineers and infrastructure managers with the evaluation of proposed changes to system configurations, operating system upgrades or hardware replacement without affecting the production network. Our network modeling platform provides the ability to evaluate proposed changes to network devices by importing modified configuration files, evaluating the changes against policies, best practices, and regulations, and reporting on risks and vulnerabilities. Additionally, changes can be reviewed and compared, paths and connectivity can be analyzed, compliance reports can be run and reviewed.

Comparison Analysis

Tracking changes over time provides a rich data source for analysis.  Comparison Analysis allows the user to review two points in time to identify changes across the system including assets, rules, objects, and paths.

‍

Vulnerability Prioritization provides the Network Security Team and Compliance Team with capabilities that allow users to:

• Align network architecture understanding and break silos through a single pane of glass
• Train first responders and harden defenses via realistic attack scenario simulation
• Prioritize vulnerability mitigation faster

‍

‍

Network Architecture Understanding

Monitoring for indicators of compromise allows organizations to better detect and respond to security compromises. When the security team discovers a potential compromise, NP-View can assist with incident response by quickly identifying critical paths to the compromised system.

For example, critical host H-192.168.1.103-32, a database server on the network, is experiencing increased reads.

‍

‍

Train First Responders

Users can be trained to use NP-View to quickly assess the situation. NP-View shows each host with the inbound and outbound paths. In this example, the inbound port, 443, is the likely target for the increased database activity.

‍

‍

Prioritize Vulnerability Mitigation

‍

Stepping stones are hosts in a network which could be compromised and used by malicious attackers to perform lateral movements. Attackers hop from one compromised host to another to form a chain of stepping stones before launching an attack on the actual target host.

Using the stepping stone analysis, the security team can quickly identify the paths of concern and the number of steps away from the compromised system or other important assets and can quickly prioritize a remediation plan.

‍

‍

Tutorials

• Product videos on our Marketing site
• Tutorial: NP-View Professional Server – Feature Demonstration with Palo Alto NGFW Devices
• Tutorial: NP-View Professional Server – Feature Demonstration with Fortinet Devices
• Tutorial: NP-View Professional Server – Feature Demonstration with CheckPoint R80

Webinars

Learn how NP-View can be leveraged to improve your compliance and security workflows through our collection of webinars.

• Webinar #1: Using NP-View at Home & Remote Network Access Verification
  • Video
  • Slides
• Webinar #2: NP-View Workflow for NERC CIP Audit
  • Video
  • Slides
• Webinar #3: How to Efficiently Organize & Update your NP-View Projects Over Time
  • Video
  • Slides
• Webinar #4: Towards Continuous Compliance with NP-View Server
  • Video
  • Slides
• Webinar #5: NP-View Use Cases Beyond NERC CIP Audit
  • Video
  • Slides
• Webinar #6: Cyber Resiliency: Thinking Differently about Cybersecurity
  • Slides

This article will focus on the Access Rules Report.

NP-View uses reports to present network information related to the open workspace.  These reports are available to all users and can be accessed from the main menu. For more information visit the Workspace Reports Overview article.

Access Rules – Defined

The Access Rules Report can be accessed in two ways. Each way presents a different filtered data set.

1. From the main menu, the table will populate the table with all rules for all devices in the workspace.
2. From the topology, when clicking a Firewall/ Router/ Switch – its info panel will open – and the user can select Access Rules from the Data for this Device section. Only the rules for the selected device will be displayed in this case.

*main menu

       *info panel

What Data is Present?

The list below the image details the data types available in the Access Rules Report.

Table Actions

There are a number of actions that can be taken in the Access Rules report, some are specific to Access Rules, others are universal to all Reports.

1. Cells with more data then can be shown within the width of the column will display a + icon, which will show the additional data when clicked.
2. The source, destination and service columns will show related object groups and object data within the + popup.
3. Columns can be displayed or hidden using the hamburger menu in the upper right corner of the report.
4. Changes to the menu are automatically saved.
5. Additionally, the table can be exported as displayed, with comment history or with object groups.
6. Only visible columns will be displayed.
7. Columns can be sorted, rearranged or resized and changes will be automatically saved.
8. Column filters can be displayed.
9. Filters applied to the table or column will automatically be saved.
10. Filters can be reset from the hamburger menu.

*the Access Rules Report Menu

Comments

+

NP-View provides a simple and easy way for users to add comments and other metadata to rows in Access Rules, and to track the historical lineage of these comments in a workspace. Comments can be added, or viewed, for integrity purposes they cannot be edited or deleted.

Adding a Comment: Comments can be added to a row by double-clicking on the cell in the column “Comment”.  Comment text and status can be added and then saved with the save button. Once the comment is saved, the author and time stamp are automatically inserted.

*applying comment

*applying comment – closeup

Comment History: Additional comments can be added to a row to begin creating a lineage or history of comments. This history will be automatically available when more than one comment exists on a row and can be expanded by clicking the blue clock icon on the leftmost column of the table. If there is no history the icon will be disabled.

When viewing history, changes between lines are highlighted in blue.

Example: If Comment 1 is: “rule comment 1” – ‘verified’ and Comment 2 is “rule comment 1a” – ‘to revise’ the status cell would be highlighted because there was a change – the comment text would not be highlighted if the text remained the same.

*Viewing comment history

Access Rules Hash

Access Rules are uniquely tagged (Object ID) within NP-View for linkage to comments and risks.

Additional Features

• The Compare button invokes a time series comparison function for the report.   Additional details on this function can be found here.
• Comments can be imported from an Excel file.  Additional details on this function can be found here.
• Conditional formatting can be applied to this table report.  Additional details on this function can be found here.

Comparison Report

+

Access Rules and Object Groups have a Compare function to show historical differences in data that has been added or removed. The function can be engaged by clicking the “Compare” button located at the top of the page. This function is used to display changes over a period of days.

The user can select a time frame (7, 30, 90 or 356 days or a custom date range). The user can select one or more devices to include in the report and then show the history over the range. Once the parameters are selected, the “Show Comparison” button should be selected.

The comparison function will display all changes (Rule Adds, Rule Removal and Unchanged Rules) for the selected days. The data will be displayed using the column format of the selected table. The user can filter on added, removed or unchanged rules by clicking the jelly bean. Added rules will be highlighted in green, removed rules will be highlighted in red and unchanged rules will be highlighted in light blue.

Clicking the “Compare” button will revert to the normal table but will not clear the selections.

Clicking the “Reset” button will clear the selections and reset the table.

This article will focus on the Asset Inventory Report.

NP-View uses reports to present network information related to the open workspace.  These reports are available to all users and can be accessed from the main menu. For more information visit the Workspace Reports Overview article.

Asset Inventory

This report provides a summary of all assets loaded into the workspace including: Firewalls, Routers, Switches, Gateways and Hosts.

Unmapped – What is it?

For some devices there may be a large number of hosts defined in the Asset Inventory but less shown on the Topology Map. These “missing hosts” are not actually missing on the map, they are hidden in a Gateway node titled ‘Unmapped’.

If an IP address is displayed as 0.0.0.0 this device has an IP address assigned by DHCP and while the device was detected, an IP address could not be extracted, and it would be said to be an Unmapped Host. Unmapped hosts have enough information for identification but not for mapping purposes on the topology map.  These ‘invisible’ hosts are located behind the Unmapped, or other, gateways and can be seen in a given gateway’s peer list.

‍

NP-View uses reports to present network information related to the open workspace.  These reports are available to all users and can be accessed from the main menu.

This article is focused on the Background Tasks Table.

Background Tasks

This table displays the active and completed processes both for the current workspace, and for all workspaces. When in a workspace you have the ability to filter and view the active processes for the current workspace and to clear or cancel completed or active processes for the current workspace.

Access: Background Tasks can be accessed in three ways.

1. From the main menu
2. Using the hotkey ‘T’
3. Clicking on the active spinner on the topology map

*main menu

     *active background tasks spinner

Overview

The Background Tasks table shows the status of each task spawned by a data import, merge, analysis, or by run policies.

• Parsing tasks indicate the imported file is being normalized and hosts inferred.
• Merge tasks combine the normalized data into the topology map.
• Analysis tasks define all of the paths and open ports.
• Policies review the active requirements to identify potential risks for review.

An example of the background tasks table is in the image below.

The report contains the following data and has the following functionality:

Report Data:

• Task name
• Progress
• Workspace where the task is running
• User who owns the task
• The time it started or ended

Report Functions:

• The check box allows the user to filter on the tasks pertinent to the current workspace.
• The X allows the user to cancel a task that may be running too long or be stuck for some reason.
• The user can also cancel all tasks within a workspace using the “Cancel All for this Workspace” button

Change Tracking

Overview

• The Change Tracking Report logs modifications that are made to the network and the updated configuration files that are imported.
• It can be accessed from the main menu
• For every change, the timestamp, action, device, and description are recorded.
• Changes are displayed and can be filtered by calendar day.
• At the top of the table is a drop down that allows the user to select which day to review.
  • The default is the current day.

Functionality

The Change Tracking Report can be:

• searched
• sorted by any column
• switched to a list view
• exported
• and configured with alternate columns if required

These functions are available in the upper right corner of the table.

Change Types

The types of change actions that are logged are:

1. File import – for each file uploaded, of the following statuses will be displayed:
   • “successful import” – file imported successfully”
   • ignored file: <filename> – unknown file type, ignored
   • “failed import” – file failed to import, review help center for reason
2. Topology map – for each file uploaded, of the following statuses will be displayed for the topology map
   • “device path information” – triggered if the connectivity matrix changes
     • Paths can be added or removed
     • Assets refers to destination IP addresses
     • Services refers to the unique ports (or any) associated with the imported device
     • Details on the above can be viewed in the Connectivity paths
   • “topology updated” – indicates the topology map has been successfully updated
   • “topology failure” – indicates the topology map has failed, review help center for reason
3. Connectivity Paths – for each file uploaded, of the following statuses will be displayed for the workspace
   • “workspace analysis updated” – all other tables have been successfully updated

The following table is a comprehensive list of supported devices. The instructions provided in the table can be used to manually extract data from the device for import. While we do our best to support the below devices, it is impossible for us to test the parsers with every possible device configuration combination. If errors occur during device import, Network Perception is committed to working with our customers to resolve their specific parsing issues.

Note that Network Perceptions device support policy follows that of the manufacturer.  When a manufacturer ends support for a product, so does Network Perception.  End of support devices are not removed from NP-View but will not be upgraded if issues arise.

Supported Devices with Vendor Partnership

The devices in this list are actively tested in our lab to support the most current versions of the manufacturer software. Network Perception has an active partnership with these vendors for software and support.

Supported Devices with no Vendor Partnership

The devices in this list are actively tested in our lab to support the most current versions of the manufacturer software.

Historical Devices

The devices in this list were developed based on customer provided configuration files.  We are no longer actively developing these parsers but they are supported for break/fix and require customers sanitized config files to assist with the debug of issues.

Additional Instructions

Palo Alto Panorama & NGFW

+

Panorama

If Panorama is used to centrally manage policies, the access rules and object groups can be retrieved from these devices in XML format (we do not support the import of unstructured text files). If using the Panorama connector, the required files will automatically be downloaded:through 6.2 ended September 2023. Please note that no upgrades to these parsers will be made.

The Panorama file will only contain centrally managed access rules and object groups.

Locally defined access rules and object groups cannot be retrieved from Panorama and must be retrieved from each NGFW. Please follow the instructions below to export directly from the Next Gen FireWall using API.

Palo Alto Firewalls will ALWAYS have a V-sys even if one has not been configured it will default to vsys1.

The “mapping_config” file is required which can only be retrieved through the API using the “show devices connected” command.  The name of the file is “named_mapping_config.xml” where the named prefix needs to match the device name as shown in the UI when the running_config.xml is imported alone. All files should be imported at the same time. Please see instructions below:

The below links are to the Panorama documentation for the required commands with examples. The links provide you with commands to run directly in the Panorama CLI. The images we provided are for using Postman or web browser use.

Get API Key

Get Panorama and device bundle Configuration

Get device mapping config

Once both the “<panorama_server>_running_config.xml” and <panorama_server >_mapping_config.xml” are gathered, please import them together in NP-View.

Next Gen Firewall (NGFW)

If using the PanOS connector is used to download files, the required files will automatically be downloaded:

The configuration information from the NGFW may be contained in several .xml files, <device-name>_merged_config.xml and <device-name>.vsys(n)_pushed_policy.xml.  There can be one vsys file per virtual interface. The naming of these files is important for the parser to merge them during import.  All files from a single firewall must be imported at the same time and in .xml format (we do not support the import of unstructured text files).  If any of the files are missing, improperly named or formatted, an error message will state that ‘File parsed but ruleset and topology were empty, aborting’ meaning they could not be linked to the other associated files.

An example of properly named files is below:

• Chicago-IL-100-FW1_merged_config.xml
• Chicago-IL-100-FW1.vsys1_pushed_policy.xml
• Chicago-IL-100-FW1.vsys2_pushed_policy.xml

NOTE: If the NGFW is an unmanaged/standalone Palo Alto device it will not have a pushed_policy file. In this situation, the configuration .xml file can be downloaded directly from the firewall and loaded into NP-View.  The file name need not be changed when loading the file from a standalone firewall.

To manually export configuration files from an unmanaged firewall:

If the NGFW is managed by a Panorama, the API will be required to secure the necessary files:

Get API Key

Get PANos Firewall full configuration

Get Managed Firewall configuration

Virtual Routers (vrf) – Experimental Support

Virtual router (vrf) is a software-based routing framework in Palo Alto NGFW that allows the host machine to perform as a typical hardware router over a local area network. NP-View has added the experimental capability to detect Virtual Routers from Palo Alto devices (NGFW or Panorama) and present them in the Connector or Manual Import device selection screens. Virtual Routers will be treated the same as physical routers and will require a device license.

This feature is disabled by default and must be enabled prior to importing configurations containing virtual routers.

To enable the feature the NP-View Server admin will need to make a change to a system variable.

• Stop the NP-View Server application.
• in the docker-compose.yml file, change the enableVirtualRouters=False to enableVirtualRouters=True in three places within the file.
• start the NP-View Server application.

For Desktop

• Close the NP-View application.
• In the file C:\Users\<username >\AppData\Roaming\NP-View\config.ini add enableVirtualRouters=True
• Restart the NP-View application

Once enabled, the user will be presented with the option to select virtual routers from the connector in the device selection or upon manual import.

SonicWall

+

We support .exp files as the default SonicWall file format for v5.9 and v6.X of the SonicOS.

The main UI allows for export of the encoded .exp file as such:

To extract the file via command line, then the command to export is

export current-config sonicos ftp ftp://[USERNAME]:[PASSWORD]@[FTP IP/URL]/sonicwall.exp

Where the username/password/FTP IP or URL must be changed. The file “sonicwall.exp” will then be saved at the FTP location. As this file is encoded, there’s no way to echo or cat the data.

Requesting Support for New Devices

The above list of supported hardware has been lab and field tested.  Newer versions generally work unless their is a major platform or API upgrade.  Please contact support@network-perception.com if you wish to get more information on parsers, request support for a particular device or are interested on co-developing a solution.

NP-View includes a utility to automatically retrieve network device configuration files on a schedule. The connector types supported in NP-View Server are below:

Configuration Managers

For retrieving config files from network management systems. For each connector, the user can select the devices to be uploaded for monitoring.

Direct Device Connection

For retrieving config files directly from the network device.

Volume Shares

For retrieving config files that are uploaded to a common collection repository.

‍

Additional Connector Information‍

Checkpoint

+

For the connector to work CheckPoint devices, the API setting need to be enabled in the SmartConsole.  See the image below for settings and commands to restart the API.

Samba

+

Network Perception suggests the following when setting up the SMB connection.

1. Create a read-only user in Active Directory or on the SMB server.
2. Determine the available share (Get-SMBShare” in Windows PowerShell) or create a new one.
3. Share the SMB folder containing the Configuration files with the read-only user. For example:

1. If using the date folder and recursive search feature, clicking “See Current Date Folder” will retrieve most recent folder, in YYYYMMDD format, in the “Current Root Folder” f field. For example:

Optional fields:

1. Path to Root Folder – Directory you want to be the root folder relative to your default SMB root folder.
2. Recursive Search – Whether or not to search recursively starting at the connector’s root folder.
3. Name Filter – Filters file/directory names based on given regex statements. Any file/directory that fully matches ANY given regex statement will be included in result.
4. File Decryption Key – a PGP key can also be provided if the files retrieved have been encrypted.

If during the connector test, access is denied, the following settings should be verified and may need to be changed for the SMB to work as expected.

Running PowerShell as administrator

Input command Get-SmbServerConfiguration

Verify that EncryptData is set to false

If set to true, run command “Set-SmbServerConfiguration -EncryptData 0”

Verify SmbServerHardeningLevel is set to 0

If not set to 0, run command “Set-SmbServerConfiguration -SmbServerNameHardeningLevel 0”

Microsoft recommended default is off (0). More information about these settings can be found on the Microsoft website.

‍

If you have a system for which you need a connector or if you encounter a technical issue, please contact support@network-perception.com.

This document relates to NP-View Desktop and Server version 6.0 and later.

Connectors automate the secure retrieval of configuration files from firewalls, routers, switches, and network device configuration managers. NP-View Desktop and Server can host one or more connectors that securely retrieves configuration files manually (desktop and server) or at the specified frequency (server only).

To access the connector function, use the system menu in the upper right corner of NP-View and select 'Manage connectors'

‍

The connector function consists of several key features.

• Password manager to reuse and manage passwords across multiple connectors.
• Workflow for creating groups and connectors.
• Automated data collection and download.
• Flexible scheduling (Server only).
• Runtime and scheduling status (Server Only).

The connector function supports the files devices listed on the connectors page.

Add Credentials

To get started, the user must first create one or more credentials. Credentials are used to access the devices and can be used for one or more devices. This provides for the ability to manage multiple devices with one set of credentials. Click the 'Add New Credential button to display the input section. Credentials are segregated by device type. Select the device type and input the required fields.

Once filled in, select the save button and the credential will be saved and displayed in the 'Credentials' box. Clicking on the credential will allow the user to edit the credential.

At this time, Deleting a credential is not supported.

Create Groups

Once credentials have been created, the user can proceed to creating a Connector Group.

Select the '+' in the 'Groups' section to display the add groups function. Fill in the group name, notes and select a schedule (server only). For desktop, only the 'On Demand' function will be displayed.

Once saved, the user can click on the connector group name in the 'Groups' panel to enter edit mode or select the three dots to the right of the name for individual group options.

Pull to run all associated connectors and delete to remove the group. Note that only empty group can be deleted.

Scheduling Groups

Groups can retrieve data on a schedule, when setting up or editing a connector group, the user can set a schedule.

The user has multiple options for scheduling the connector; monthly, weekly, and daily with flexible day of week and time options. We recommend that connectors be run at night to provide maximum resources for processing the data. When a connector group is scheduled, the next run status will be presented in the 'Groups' panel

and on the 'Processes' tab

‍

Add Connectors

Once a group has been created, the user can add connectors to the group. In the connectors section, select the '+' to present the add connector function.

Proceed to select the connector type and fill in the required fields.

Next fill in the optional fields.

Filling in the name of a context will only fetch the data for that one context, leaving blank will fetch all contexts.

Selecting one ore more worspaces to deliver the fetched data. If left blank, the data will be retrieved for manual download.

The user can then test the connector to verify the credentials and/or save the connector.

Once saved, the user can click on the connector name in the 'Connectors' panel to invoke edit mode. Clicking on the tree dots next to the connector name provides individual connector options.

‍

Manual Data Pull

Data from individual connectors can be retrieved manually by selecting the 'pull' option from the menu above. When selecting pull, the connector status will proceed to 'in progress'

and the processes tab will also display the progress status.

Once data has been pulled, the user can selectively download the most current data set from the connector panel.

‍

‍

Deleting Workspaces

If a connector is designated to deliver data to workspace and a user deletes the workspace, the connector will automatically be updated to reflect the workspace deletion.

‍

In version 6.0, a new connector function was introduced. for new connector users, it is recommended to use the new connector function. The connector access has been moved from the +Import function to the system menu.

Connectors automate the secure retrieval of configuration files from firewalls, routers, switches, and network device configuration managers. NP-View Server can host one or more connectors that securely retrieves configuration files at the specified frequency. By default, connectors are accessible through HTTPS on port TCP/8443 of the NP-View server and is isolated for security purposes.

The first time an administrator accesses the connectors, they are required to define a Connector group name and a secure passphrase. The Connector group name will be used to create the encrypted connector file store. Connector information is encrypted at rest and in transit using a passphrase protected PGP key. Only the connector owners know the passphrase and the passphrase is never stored. Once initiated, connectors run in the background collecting network information.  If the NP-View server is restarted, the connector owner is required to re-authenticate and restart the connectors. Connector owners can create multiple connector groups and each will require their own login. Once created, the user can select from the list of available connectors when logging in.

The connector page contains five main options.

The buttons from left to right are:

• + Add New Connector
• bulk start all connectors (see bulk start parameters below)
• bulk stop all connectors
• delete the connector (user must be logged into the connector group to delete)
• exit the connector group.

Add Connector

To add a new connector, select “+Add New Connector”  button and a list of available connectors is presented. Connector options are: Cloud Providers, Configuration Managers,  Direct Devices and Volume Shares

Upon selecting the Connector type to add, the user is requested to fill in connection information. Connector information varies by vendor.  The connector configuration for a Palo Alto device is as follows:

The user must enter a Connector name (no spaces), host name, and credentials.  The user can then verify the credentials are correct with the “Test credentials” button.  The user can setup the polling cycle and provide the workspaces to deliver the resultant information.

Polling Cycles are:

• On demand
• Daily
• Weekly
• Bi-Weekly
• Monthly

Configuration Management Systems

For Configuration Management Systems and file Shares, additional information may be required.  The user can retrieve a list of files from the device and filter the results.  To include specific files, put them in the include list field.  To exclude files, put them in the exclude list field.  If both lists are used, include list filter will be applied first and the exclude list filter to the results of the include list filter. If the share is PGP encrypted, a PGP Public key will be required.

Workspaces must be added to the connector for data to be transferred and displayed in the workspace.  If workspaces are added after a connector is setup, data will not be sent to the workspace until the next scheduled import and a configuration change is identified.  Creating workspaces before connectors facilitates faster visualization of data.

Connector Tile

Once the connector is added, a tile is added to the connectors home page.

Connector tiles are sorted by the characters in their names using standard Linux conventions:

1. whitespace
2. integer
3. special char
4. uppercase [A-Z]
5. underscore (possibly other special chars)
6. lowercase [a-z]

From the tile, the user can:

• manually activate the connector for a one time data pull
• run / pause the connector
• edit the connector
• copy the connector
• delete the connector.

The tile banner will show in three colors:

• red – connector failed
• blue – connector scheduled to run
• gray – connector paused

Click the start / pause button to restart a failed or paused connector, note that a connector may take several minutes to change the banner color.

Connectors + Samba (SMB) Access Error

+

This error can be caused by two communication scenarios between Linux and Window. Either SMB encryption is enabled on the Server or SPN target name validation level is enabled (or both). To check which of these features is causing the issue, Run PowerShell on the Windows Server as administrator and run the following command:

Get-SmbServerConfiguration

If EncryptData = True, it can be disabled using:

Set-SmbServerConfiguration -EncryptData 0

If SmbServerNameHardeningLevel is set to any value other than the default of 0 run:

Set-SmbServerConfiguration -SmbServerNameHardeningLevel 0

to restore the default.

Help Center

The Help Center can be found on the system menu on the upper right corner of the topology.

The Help Center will display warnings or errors identified during the import of device files.

The information in the help center is designed to provide information for the tech support team to help diagnose the issues.

There are many types of possible errors including:

1. Invalid file formats (e.g., .gif or .png)
2. Improperly formatted files (files exported as text but loaded into a word processors where extra characters are added before saving).
3. Incomplete set of files (many devices require more than one file for import this includes Palo Alto and IP tables)
4. Misconfigured files where rules or objects are undefined.

As every customer has a different environment and possible device configurations are endless.  We sometimes run into a situation where the parser cannot handle the device as configured.  When this happens, we request the customer to sanitize the config file on the NP Poral and upload the file for debug purposes.  Support from our customers is important for us to quickly remediate parsing issues unique to a device or specific file.

The Help Center provides a download for the error log which can be submitted to technical support through the support portal.

‍