NP-View releases are divided into two groups:
Release candidates generally following the below schedule:
General releases do not follow a fixed schedule since they are driven by field testing and support requests.
Below is the list of releases and the features / fixes in each release. Only the most current release available to a customer will be posted on the portal.
If you have any question, please contact us at support@network-perception.com.
The release notes are also available from within the NP-View application. By clicking the version number in the lower left hand corner of the workspace screen,
the release notes can be viewed.
| Bug Fixes, Enhancements |
| Resolved an issue where some device interfaces could be missing from the NERC-CIP wizard. |
| Bug Fixes, Enhancements |
| Resolved an issue where NP-View timestamps were always displayed in UTC. |
| Bug Fixes, Enhancements |
| Resolved an issue where importing Palo Alto configuration files with multi-vsys resulted in all rules not being loaded. |
| Resolved an issue where deleting a device from Home View did not remove the device from custom views. |
| Resolved an issue where the Zone Matrix was not populating all subnets. |
| Resolved an issue where topology search on the home view was not highlighting the device. |
| Resolved an issue where Path Blocking results were not clearing on ESC. |
| Resolved an issue where special characters in file names resulted in an unsuccessful import. |
| Resolved an issue where views were switching after the import of auxiliary data. |
| Resolved an issue where Path Highlighting to Multi-Homed hosts were not displaying properly. |
| Resolved an issue where a file failing to parse was sending incorrect results to the import uploaded panel. |
| Resolved an issue where the Asset Inventory Type column drop down filter was not displaying. |
| Resolved an issue where two modals were created when using Hotkeys |
| Resolved an issue where Importing Aux files into an NPX created Workspace breaks asset verification. |
| Resolved an issue where view performance degraded as more views were created. |
| Resolved an issue where some Aliases were being improperly cataloged for Cisco devices. |
| Resolved an issue where inputting the license key on a new system failed to properly register. |
| Resolved an issue where the workspace count was being improperly calculated and prematurely reaching the system limit. |
| Resolved an issue where overlapping rules were causing duplicate paths for Palo Alto devices. |
| Bug Fixes, Enhancements |
| Added support for multi-homed hosts (hosts with multiple NIC cards). |
| Added support pfSense Community Edition version 2.7.2. |
| Added support for Cisco VRF. |
| Added a feature to verify inferred hosts on the topology and asset inventory report. |
| Added a feature to selectively hide topology data. |
| Added a topology setting to hide Gateways with No IP by default. |
| Improved the manual data import workflow for ease of use. |
| Improved support for importing and adding auxiliary data to views. |
| Improved support for Cisco ASA contexts. |
| Improved the startup performance of the NP-View database. |
| Improved the Release Notes page. |
| Improved the System Log page to better utilize page real estate. |
| Improved the Topology Export to reflect what is shown on the topology. |
| Improved the NERC CIP Report Topology Snapshots to reflect what is shown on the topology. |
| Resolved an issue where auto generated network zone that contains a name with a period (‘.’) as one of the characters cannot be deleted. |
| Resolved an issue where TwiceNAT rules were not being displayed. |
| Resolved an issue where MAC addresses were not showing in the interface table or asset inventory table when loaded from ARP files. |
| Resolved an issue where we were not detecting when a Cisco ACL has Both a Src and Dst binding. |
| Resolved an issue where translated NAT addresses were showing up as an unmapped address. |
| Resolved an issue where the external route file for a Cisco device is parsed but routes are not saved. |
| Resolved an issue where editing the node criticality was also editing the criticality for the Zone. |
| Resolved an issue where processing a Fortinet with an embedded switch returned erroneous rulesets. |
| Resolved an issue where collapsing all nodes in a zone left an empty zone on the topology (it is now hidden). |
| Resolved an issue with parsing an encoded SonicWall file. |
| Resolved an issue where some object groups were being duplicated. |
| Resolved an issue for the SEL where file content shown in UI has many ***** lines that are not in the config imported. |
| Resolved an issue where default rules have incorrect line numbers due to empty chains/ACLs on Linux. |
| Removed the Explicit Deny by Default section from the Best Practice Report. |
| Removed (temporarily) the ability to compare two configuration files from the file viewer. |
| Bug Fixes, Enhancements |
| Resolved an issue where scheduled connectors would not run unless logged into the connector group and upon logging in, all connectors were being run (server only). |
| Resolved an issue where some device manufacturers were being improperly displayed in the UI. |
| Resolved an issue where some users were prohibited from creating access rules and object groups comments when using LDAP authentication (server only). |
| Resolved an issue where transferring a workspace was not properly completing resulting in missing data in the info panel (server only). |
| Bug Fixes, Enhancements |
| Resolved an issue where the workspace report failed to generate under certain conditions. |
| Bug Fixes, Enhancements |
| Improved the performance of the Cisco device parser. |
| Resolved an issue where the Description Field in the Access Rules table was showing duplicate data for Cisco devices. |
| Bug Fixes, Enhancements |
| Added a topology filter to show / hide gateways that have no IP address. |
| Bug Fixes, Enhancements |
| Please read the disclosure on Incremental Data Availability Across Workspaces and Views. |
| Improved the presentation of Vulnerabilities and Services from the info panel. |
| Improved NAT Rules to Show CIDR Instead of Object Group Name for Translated Address. |
| Improved the display of Fortinet interfaces to include the alias property. |
| Improved the performance when saving topology. |
| Improved the table highlighting for object group popovers on the access rules table. |
| Improved support for warnings in the risks and warnings report. |
| Added a connector and data parser for Claroty CDT to import assets. |
| Improved support for Ruggedcom RX1500 and Ruggedcom ROX devices. |
| Improved support for Fortinet with focus on 7.2 devices. |
| Improved the performance of the Cicso device parser. |
| Resolved an issue where L2 switch ports were being depicted as gateways. |
| Resolved an issue where IP addresses assigned to each L2 switch were improperly creating hosts. |
| Resolved an issue where Fortinet L2 VLAN’s were not set correctly for switch ports. |
| Resolved an issue where the nesting in a service group was not identified for Sonicwall. |
| Resolved an issue where exported workspaces were not visible to the Admin role. |
| Resolved an issue where NAT Rules were Incorrectly Showing ‘any’ as ‘Original Address’. |
| Resolved an issue where the Viewer role users could change device type. |
| Resolved an issue where the user was unable to Set Criticality for Host to None. |
| Resolved an issue where the Zone Segmentation Matrix was being enabled for Single Zone (requires at least two zones). |
| Resolved an issue where ‘ESC to clear’ banner was still present after switching views. |
| Resolved an issue where Summary reports were not updated with data from updated risks report. |
| Resolved an issue where Object Linking was not working for all Objects w/IP on the Topology. |
| Resolved an issue where Palo Alto Virtual Routers were being pushed as separate devices. |
| Resolved an issue where the Interfaces Tables in a view was not filtering out other devices in the workspace. |
| Resolved an issue where global objects were not properly displaying in the access rules table. |
| Resolved an issue where translated NAT addresses were showing up as an unmapped address. |
| Resolved an issue where the outbound highlighted paths were not displayed correctly. |
| Resolved an issue where deleting a device from the Home view was not deleting zones properly. |
| Resolved an issue where cancelling an analyze process could render the workspace unusable. |
| Resolved an issue where the Application set to ping for Palo Alto devices was generating an unnecessary risk alert. |
| Resolved an issue where the NERC-CIP report would not generate until after a Topology Save. |
| Resolved an issue where the NERC-CIP Wizard is not auto selecting EAP when attached to multiple EACMS. |
| Resolved an issue where comments were not retained when importing a .npx file from a version prior to 5.0. |
| Resolved an issue where deleting a view may make a Workspace unusable for another user (server only). |
| Resolved an issue where connector won’t upload to a Workspace when the Workspace is added connector creation (server only). |
| Moved the device delete option to the kebab menu. |
| Removed ‘est time remaining’ from background tasks. |
| Bug Fixes, Enhancements |
| This release contains several database architectural changes designed to improve system performance. During installation, a database maintenance procedure will be performed which will: > Remove topology history from the system freeing up to 60% of database and RAM. > Remove all pre-generated table highlights. > Remove all pre-generated risks and warnings data. > Path Analysis has been improved to reduce RAM usage and resolve several issues with external path analysis where not all external gateways were included in the analysis. Upon next analysis run (data import into a specific view), the analysis results will include the previously omitted paths. *** It is strongly advised to back up your NP-View database prior to upgrade as there is no going back to a previous version otherwise. |
| For users of the OVF, we replaced CentOS7 with Ubuntu Server due to the pending end of life for CentOS7. |
| Added an Interfaces report for individual devices and workspaces. |
| Added a Routes report for individual devices. |
| Added a NAT report for individual devices. |
| Added a Zone Connectivity Matrix to show communication between zones. |
| Added a connector and data parser for Claroty CDT to import assets. |
| Added table highlighting to the connectivity paths table to identify interactive service ports. > This feature must be enabled in the policy manager. |
| Added support for Cisco VACL’s and Static NAT from Route maps. |
| Added support for FortiSwitch Rugged devices. |
| Improved the visualization and performance of the connectivity matrix. |
| Improved the visualization and performance of the Risks and Warnings report and added linkage of rule risks to the access rules report. > Note that the rule risk requirements have been updated and all previous risk alerts will be removed upon upgrade. > It is recommended that the risks and warnings table be exported before upgrade if information is to be retained. > Also, the comment function has been removed from the risks and warnings table, the recommendation is to use the linked rules table to add comments. |
| Improved the visualization and performance of the Asset Inventory report. > The comment function has been removed from the asset inventory report. |
| Improved the performance of the table highlighting function. |
| Improved the performance and usability of the Manage Views function. |
| Improved the performance and usability of the zone creation and management functions. |
| Improved the performance and usability of the Topology Map including, loading time, expand / collapse, and stepping stone workflow. |
| Improved the performance and memory requirements of the external path analysis. See the KB for details of the analysis changes. > For some customers this manifested itself as a process stuck at 93% which never finishes. |
| Improved support for Fortinet devices including tunnels. |
| Improved the performance of the save topology function. |
| Updated the workspace report to match the new interface, NAT, and Routes reports. |
| Resolved an issue with Fortinet where ISDB services used in rules were incorrectly formatted. |
| Resolved an issue where the Best Practice Report, Section 1.4, showed unmapped hosts. |
| Resolved an issue where disabling a table highlighting requirement or policy did not work. |
| Resolved an issue where the analysis would incorrectly discard legitimate peers from tunnel endpoints. |
| Resolved an issue where the analysis failed to translate fully qualified domain names nested groups. |
| Resolved several parsing issues with Fortinet devices. |
| Resolved an issue where importing host Aux Data did not import IP Addresses. |
| Resolved an issue where the desktop software would time out after 30 days and require reauthentication. |
| Resolved an issue where the desktop “Printer / PDF” function did not provide an option to Print. |
| Restored the workspace rename function. |
| Removed the comment feature from the risks and warnings and asset inventory reports. |
| Removed the comment count blue bubble from the topology and settings menu. |
| Removed the reset function for table highlighting as it is no longer needed. |
| Removed the SRC Criticality and DST Criticality columns from the Access Rules table due to loading performance issues. |
| Bug Fixes, Enhancements |
| Resolved an issue where scheduled connectors would not run unless logged into the connector group and upon logging in, all connectors were being run (server only) |
| Resolved an issue where some device manufacturers were being improperly displayed in the UI. |
| Resolved an issue where some users were prohibited from creating access rules and object groups comments when using LDAP authentication (server only). |
| Resolved an issue where transferring a workspace was not properly completing resulting in missing data in the info panel (server only). |
| Bug Fixes, Enhancements |
| Improved support for virtual routers associated with a virtual firewall in Palo Alto devices. Note that the improved support identifies additional interfaces which will add extra computational time to path analysis. |
| Improved support for Routes, Static/Dynamic NAT, Route Maps and VACL’s in Cisco devices. |
| Improved support for tunnels in Fortinet devices. |
| Improved support for IPSec tunnels in both star and meshed communities in CheckPoint devices. |
| Resolved an issue where some ports were missing in Fortinet FTD devices. |
| Resolved an issue where Rule & Object IDs are being duplicated causing reporting conflicts. |
| Resolved an issue where FortiSwitch devices were not properly parsed. |
| Resolved an issue where legitimate peers from tunnel endpoints were incorrectly discarded. |
| Resolved an issue where importing Host Aux Data did not display IP Address for an unmapped host. |
| Resolved an issue where the Notification manager displayed improperly requiring a refresh to clear. |
| Resolved an issue where connectivity paths in excess of 100,000 rows caused a view not to load. |
| Resolved an issue where the system log was not using a consistent time zone for tagging events. |
| Resolved an issue where repetitively exporting / importing a workspace caused the file to exponentially grow in size. |
| Bug Fixes, Enhancements |
| Added the capability to analyze rule usage from Palo Alto Next Generation Firewalls using the updated connector and Access Rules Table. See the Knowledgebase for details. |
| Resolved an issue where naming was not enforced for connectors. The connector naming is now consistent with the naming of Workspaces and Custom Views (3-24 alphanumeric, hyphen, or underscore characters). If the user edits any existing connectors with an invalid length or characters, they will need to adhere to the updated naming convention before saving. |
| Bug Fixes, Enhancements |
| Improved support for virtual firewalls and virtual routers in Palo Alto devices with additional support for device selection in connectors and manual import. |
| Improved the Cisco parser to include serial port information. |
| Improved device type identification for Switches and Routers. |
| Improved multiple parsers for preserving interface names and port ID. |
| Improved tunnel type identification for Fortinet devices. |
| Improved the coverage of address pool peering to better present tunnel peers. |
| Improved support for Fortinet VDOMS which have the same name on different devices. |
| Improved the labeling on topology hosts and network nodes to display names by default and IP addresses on hover. |
| Improved the real-estate usage of the workspaces page to allow for more horizontal widgets. |
| Improved support for multi-vsys on Palo Alto devices. |
| Improved the performance of the analysis engine for large config files. Depending on file size and vendor we have seen up to a 30% reduction in processing time. |
| Resolved an issue where the version sorting on the Compare Path history function was not in descending order. |
| Resolved an issue where the topology may not refresh with new devices after a connector pull. |
| Resolved an issue where URI reserved characters were showing as percent encoded in asset inventory. |
| Resolved an issue where the contents of search boxes were not saved in access rules. |
| Resolved an issue where Alphanumeric naming was not enforced for connectors. This allowed users to previously name connectors with not approved characters. If the user edits these connectors they will need to adhere to the updated naming convention to save. |
| Resolved an issue with the Connectivity Matrix not refreshing after new configs were imported. |
| Resolved an issue where the System Log pause or download feature did not work properly. |
| Resolved an issue with License and Terms where setting a device as Invisible did not work as intended. |
| Resolved an issue for Fortinet devices where additional paths were shown for rules with destination zones. |
| Resolved an issue for Fortinet devices where source and destination bindings were sometimes incorrect in the Access Rules Table. |
| Resolved an issue with Fortinet parsing ports. |
| Resolved an issue where running “Stepping Stone Analysis” from the NERC-CIP wizard broke path highlighting. |
| Resolved an issue where Step 4 of the NERC-CIP wizard would intermittently not load the path information. |
| Resolved an issue where Highlight Paths mode did not show “ESC to Clear” when paths were selected. |
| Resolved an issue where renaming a Workspace required a browser refresh. |
| Resolved an issue in the Workspace Report where the Access Rules table for Palo Alto devices was not sorting correctly. |
| Resolved an issue with the desktop edition where the list of exported workspaces did not persist. |
| Resolved an issue with the SonicWall parser which was erroring when setting binding groups. |
| Known issue: saving a topology with a large number of tags & criticalities can be slow. |
| Known issue: loading or deleting workspaces when the system contains a large number of conditionally formatted access rules can be slow. |
| Known issue: loading a Panorama file with multiple firewalls, vsys and virtual routers can be slow to present the device selection list. |
| Known issue: loading the devices from a CheckPoint R80/R81 connector for device selection can be slow due to CheckPoint API issues. |
| Bug Fixes, Enhancements |
| Resolved an issue where NP-View Desktop would not start properly on Windows Server 2016. |
| Bug Fixes, Enhancements |
| Added a CiS Benchmark Policy for Juniper. |
| Added support for rules with action trust bypassing other rules for Cisco Firepower. |
| Added experimental parser support for FS Switches. |
| Added alphabetical sorting to the connectors page. |
| Improved the performance of the device information panels. |
| Improved the performance of the Connectivity Paths Table and linked the Path Table to the Access Rules Table for visibility. Note that comments are no longer available for the Connectivity Paths table. |
| Improved the performance of the backend system manager and webserver. |
| Improved the Cisco parsing grammar to support service-object referencing IANA ports by name. |
| Improved the ability for the Cisco parser to identify device types. |
| Improved the loading animation to show status updates. |
| Improved the ability for parsers to detect misformatted xml files and log errors. |
| Updated the Service Risk Policies and Highlighting to exclude Ping. |
| Upgraded the NERC-CIP ERT export to v7 and the Asset Column Dropdown options in ERT > BES Table. |
| Resolved an issue to preserve the sequence order from the XML data for Panorama. |
| Resolved an issue where the criticality of hosts were not being updated in the Access Rules Table. |
| Resolved an issue where MAC addresses were not displaying. |
| Resolved an issue where internally generated NPV_ interfaces were showing in the UI. |
| Resolved an issue where some path highlights were missing. |
| Resolved an issue where Interface names in NERC CIP Wizard do not match names in Access Rules modal. |
| Resolved an issue where the Access Rule config line numbers were incorrect (desktop only). |
| Resolved an issue where the Object Groups comparison bean count didn’t match the rows in the table. |
| Resolved an issue where all devices from the same device group in the Panorama connector retrieve device list were not showing. |
| Resolved an issue where the asset call on home view returned a list of interfaces instead of assets. |
| Resolved an issue where historical comments for removed Access rules Object groups were not displaying in compare mode. |
| Removed the pin/unpin, arrange in circle and expand/collapse icons from the topology map (they are available by clicking on a node and using the kebab menu on the info panel). |
| Bug Fixes, Enhancements |
| Resolved an issue where retrieve device list for the Checkpoint connector was not working. |
| Resolved an issue where the Risks and Warnings list in the Best Practice report did not match the Risks and Warnings Modal. |
| Resolved an issue where the Hostnames Node Count in Section 1.4 of the Best Practice Report was incorrect. |
| Resolved an issue with the NERC-CIP Excel Export where the Critical Assets Tab was displaying errors. |
| Resolved an issue where opening the Rules/Groups modals before the map loads causes an infinite re-render. |
| Resolved an issue where the Viewer Role could hide, add and delete comments in change tracking; add standard comments to access rules and object groups and can click ‘create new view’ button in Manage Views. |
| Resolved an issue where the Name of New View field becomes unselectable (Windows Desktop). |
| Resolved an issue where Workspace Report MD5 Checksums did not match the files. |
| Resolved an issue where some NAT Rules are missing translation in the Workspace Report. |
| Resolved an issue where the CheckPoint R80/R81 Connector was unable to fetch configs (Server). |
| Resolved an issue where selecting Generate NERC CIP Report from Summary Reports did not include Topology Screenshots. |
| Resolved an issue where the exported Topology Map PDF was Missing Zone Names. |
| Resolved an issue where the Access Rules and Object groups modals did not refresh after switching to Comparison mode. |
| Resolved an issue where the NERC CIP Report page becomes unresponsive and crashes the application for large views. |
| Resolved an issue where renaming a custom view breaks linkage to assigned zones. |
| Resolved an issue where Clear All Filters and Reset All Settings did not reapply the default sort order. |
| Resolved an issue where the number of paths in the workspace and Workspace Report did not match. |
| Resolved an issue with the incorrect number of in access rules for Fortinet devices. |
| Resolved an issue with the incorrect display of rule services for Fortinet devices. |
| Resolved an issue where the Access rules table was missing policies for SonicWall devices. |
| Improved the Cisco parser to extract radio port attributes from statement “interface dot11Radio X”. |
| Improved the Cisco parser to create zones from security level interfaces. |
| Improved the Cisco parser to create port-channel and sub-interfaces with type virtual. |
| Improved the Cisco parser to preserve interface names and port IDs. |
| Improved the Cisco parser to display a default gateway off of a BVI interface on the topology map. |
| Improved the Cisco parser to parse SNMP server hosts. |
| Improved the rendering of the Access Rules and Object Groups modal reports. |
| Added a table for Rules without Descriptions to the Best Practice report. |
| Added the ability to show NAT Rule translation “any” in workspace report. |
| Added a parser for the XML output of the SEL-3620. |
| Removed conditional highlighting from Access Rules Service column for ICMP any to any. |
| Bug Fixes, Enhancements |
| Resolved an issue where importing a .NPX file or access rules table with comments resulted in improper loading of the data into NP-View. |
| Resolved an issue where the Workspace report was not filtering the risks and warnings for the open workspace and the count of interfaces did not include hidden management networks. |
| Resolved an issue where the NERC-CIP report would not generate when a large quantity of access rules were present in the workspace. |
| Bug Fixes, Enhancements |
| As of this release, the Essential Desktop and Enterprise Server editions are no longer being offered. NP-View is offered in a desktop edition for Windows and a Server edition for Linux. |
| Improved NERC-CIP wizard workflow to include any:any interfaces when using external analysis. |
| Improved NERC-CIP report topology snapshots to include in-scope hosts. |
| Improved the Palo Alto and Cisco parsers to resolve specific customer issues. |
| Added analysis description to View Names to indicate type (standard or external) in manage views and view selector. |
| Added NAT table in Workspace Report. |
| Resolved an error for RuggedCom RX1500 performing analysis to target node. |
| Resolved an issue where the Rule Policy destination service ‘any’ rule triggered a risk for the any to case. The update now restricts the risk to ‘any to any’ cases. |
| Removed the traces function from device info panel. |
| Removed the single device Drilldown option from home view right click menu (use view manager). |
| Removed the Connectivity matrix from Info panel on Home view (still available from within custom views). |
| Removed the device rename option from the device info panel. |
| Resolved an issue where the SSH connector returns success even with a bad password when testing the connector (Server Only). |
| Resolved an issue where the SSH connector returns success even with a bad password (Server Only). |
| Resolved several access related issues to the viewer role (Server only). |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Resolved an issue where standard comments were missing from the Workspace Report. | X | X | X | X |
| Resolved an issue where renaming a Drilldown view caused the view to not load. | X | X | X | X |
| Resolved an issue where the criticality of Hosts was not being updated in the Access Rules Table. | X | X | X | X |
| Resolved an issue where Views could be created with zero devices selected. | X | X | X | X |
| Resolved an issue where the access rules and object groups compare function were not filtered to the active device. | X | X | X | X |
| Resolved an issue where disabling a standard policy was not disabling the policy. | X | X | X | X |
| Resolved an issue where Palo Alto host IPs were not properly linking from the Access Rules and Object Groups table. | X | X | X | X |
| Resolved an issue where the Export Map function was not displaying zones. | X | X | X | X |
| Improved loading performance of the main menu. | X | X | X | X |
| Resolved an issue where Palo Alto 850 VLAN interface IP Addresses are not detected. | X | X | X | X |
| Resolved an issue for Checkpoint R80 with Parse bond interfaces/link aggregation. | X | X | X | X |
| Improved support for Fortilink protocol to depict layer2. | X | X | X | X |
| Resolved several issues where SonicWALL configurations were not loading. | X | X | X | X |
| Resolved an issue where Compare Path History was erroring when loading the difference table. | X | X | X | |
| Resolved an issue where updating a connector triggers the connector to run. | X | X | ||
| Resolved an issue where Connector Groups would not load after upgrading to 4.1.0 | X | X | ||
| Resolved an issue where running an on demand connector ran all active connectors | X | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Replaced the Access Rules and Object groups table reports with a new technology that provides for faster rendering and support for larger workspaces and configuration files. The new report contains upgrades for the following: comparison, comments with inline editing and history, conditional formatting, import/export, topology linking to devices. The Access rules table now supports Object group visibility and duplicated rules. | X | X | X | X |
| Replaced the ‘Manage Zones’ function with a new technology to improve performance. | X | X | X | X |
| Improved support for Fortinet devices including support for internet services in policies, hardware switches, virtual-switch blocks and the “Forti link” protocol, to depict layer 2. | X | X | X | X |
| Resolved issues with Cisco devices where NP-View was not identifying split tunnels and corresponding ACL and was throwing an error when parsing ipv6 object “subnet ::/0”. | X | X | X | X |
| Resolved an issue where Sophos v19 was not properly categorized. | X | X | X | X |
| Resolved several issues with the sanitizer not supporting devices properly. | X | X | X | X |
| Increased the default number of devices within a custom view to 25. | X | X | X | |
| Replaced the SMB connector with a new technology that improves connector reliability and folder recursion. | X | X | ||
| Removed the polling limiters from the notification manager. | X | |||
| Resolved several issues when supporting HA pairs (Connector and Risks and Warnings). | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Resolved an issue preventing the Windows Desktop Edition from starting after installation. | X | X | ||
| Added function to manually save the topology map for admin and workspace admin user groups | X | X | X | X |
| Improved the parser logic and support for Fortinet devices; ISDB services in rules, objects of type ‘interface-subnet’, address group Wi-Fi address with no static IP address and Mismatched VDOM in rule/service association | X | X | X | X |
| Added support for dynamic filters found inside address objects for Panorama devices | X | X | X | X |
| Improved support for Palo Alto 850 | X | X | X | X |
| Resolved issues where the comments don’t persist for Object Groups or Risks & Warnings reports and the comment timestamp becomes “N/A” after closing report. | X | X | X | |
| Implement logic to provide additional granularity for session timeout and changed the default to half hour if session length is set to 0. | X | X | ||
| Improved Panorama connector logic and support for Fortinet FortiManager devices | X | X | ||
| Enhanced the Source, Destination and Service columns in the Access Rules table to display and export Object Group details | X | |||
| Added support for the licensing of active / passive HA groups for firewalls | X | |||
| Improved the comparison function for Access Rules and Object Groups | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Added function to manually save the topology map for admin and workspace admin user groups | X | |||
| Improved the parser logic and support for Fortinet devices; ISDB services in rules and objects of type ‘interface-subnet’ | X | |||
| Added support for dynamic filters found inside address objects for Panorama devices | X | |||
| Implement logic to handle floating point values for session length and default to half hour if session has been set to 0. | X | |||
| Fixed connector logic and support for Fortinet FortiManager devices | X | |||
| Enhanced the Source, Destination and Service columns in the Access Rules table to display and export Object Group details | X | |||
| Added support for the licensing of active / passive HA groups for firewalls | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Added upgraded modal reports for Access Rules and Object Groups with improved display performance. Also includes custom meta data field capability with history and export / import and data synchronization capabilities. | X | |||
| Added the capability to create custom risks and warnings within policy manager. | X | |||
| Added the capability to create custom conditional formatting within policy manager for modal reports. | X | |||
| Improved the NERC-CIP report with better support for Palo-Alto devices and improved Access Rules modal report. | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Enhanced Path Analysis table function; clicking on device name opens Access Rule modal, pre-filtered to display only the line corresponding to the IP/line/device | X | X | X | X |
| Improved the performance of the topology save function | X | X | X | X |
| Added conditional formatting to applicable sections of the NERC-CIP summary report | X | X | X | X |
| Added Path Block Analysis: take two hosts/ two networks/ or one host and one network and troubleshoot if the connection between is blocked, and if so why | X | X | ||
| Added new default requirements to perform conditional text and cell formatting; Action – Permit/Deny, Source – Any, Destination – Any, Service – Any, Risk – None, Risk Criticality – NA, Enabled – True/False | X | X | ||
| Improved Policy Manager functions; When creating requirements all logic rows will follow the operator of the first row; AND/OR. Invalid operators selection will be disabled in all rows but the first row. | X | X | ||
| Improved Panorama connector’s logic for device state selection in configuration manager; active / all. All includes both active/passive routing devices | X | X | ||
| Updated system logging with additional information when modifying custom fields in Access Rules or Object Groups | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Fixed an issue where the Object Group table displayed internal names instead of protocols and ports for the Value column | X | X | X | X |
| Fixed a parsing exception and improved parsing support for HP devices | X | X | X | X |
| Added ability to copy standard fields for Access Rules and Object Groups | X | X | X | X |
| Added an “Alias” column to the interface table for Palo Alto devices | X | X | X | X |
| Added “Checked for Updates” to System Menu | X | X | X | X |
| Improved the View Manager menu to allow users to select all devices when creating a view | X | X | X | X |
| Improvements to the creation and navigation of Topology views | X | X | X | X |
| Improved support for Cisco Remote Access Tunnels | X | X | X | X |
| Added function to include topology snapshots to the NERC CIP report | X | X | X | X |
| Improved the connector logic and support for Checkpoint devices | X | X | ||
| Improved connector usability by combining the ‘Test Credentials’ and ‘Test Connector’ buttons during set up of new connector | X | X | ||
| Fixed issues that resulted in connector errors when a user clicked either the test connector or retrieve device list buttons during new set up or editing of connector | X | X | ||
| Enhanced Policy Manager functions; at-a-glance view of a policy enabled/disable state and text/styling changes on Risks & Warnings and Table Highlighting tab | X | X | ||
| Improved the connector logic and support for Panorama devices | X | X | ||
| Enhanced Policy Manager functions; custom requirement editing and cloning | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Resolved miscellaneous issues in NERC-CIP report generation and export | X | X | X | X |
| Enhanced background task functions; clicking on active task spinner opens background task modal, clear/cancel individual tasks and vertical scroll functionality | X | X | X | X |
| Improved the stylings of the View Manager; added the search bar for devices, hovering over the saved custom view displays the device names included in the custom view. Added view/device counts | X | X | X | X |
| Implemented logic to set secure cookies never to expire for desktop edition. Set cookie expiration per customer (default = 30 days) for server edition | X | X | X | X |
| Optimized policy performance by running policies only when necessary. Default policies in serial instead of parallel | X | X | X | X |
| Improved disk recovery when there is less than 200 mb of disk available | X | X | X | X |
| Added “Internal” column to the Object Groups modal and resolved “Internal” Object Group filtering | X | X | X | X |
| Improved support for Juniper devices such as rules and groups with wildcard IP addresses, routes via multiple gateways, multiple mapped IPs in NAT rules and updated parsing of source NAT to read destination address translation and updated Juniper predefined services list | X | X | X | X |
| Added Strict-Transport-Security to default HTTP response headers to Web servers | X | X | ||
| Improved Panorama connector’s logic for device selection in configuration manager | X | X | ||
| Added “Manage Connectors” to System Menu | X | X | ||
| Added a “From Address” optional field in the Configure Service tab in Notification manager to override SMTP server’s rejection when a non valid email address is provided | X | X | ||
| Added a new SMB connector under Volume Share in NP-Connect; SMB Date Folder Strategy | X | |||
| Added the synchronization of metadata ‘custom fields’ across same object groups for users and workspaces | X | |||
| Introduced Policy Manager functions; Enterprise users can now create custom policies and requirements. Numerical comparison operators can now be used in custom requirement logic to find things like for example devices > zero | X | |||
| Enhanced Policy Manager functions; selecting a policy loads the content immediately, changed order of logic for new requirement and text/styling changes on Table Highlighting tab | X | |||
| Enhanced the Access Rules and Object Groups with the addition of custom fields for user generated content | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Resolved an issue where the line numbers displayed in Access Rules tables did not match the configuration file imported | X | X | X | X |
| Improved the path analysis, including NAT and egress functions for Cisco routing devices | X | X | X | X |
| Improved the parsing of route-based IPsec vpn tunnels | X | X | X | X |
| Resolved an issue where interfaces relying on variables defined in template stacks were not properly parsed | X | X | X | X |
| Resolved an issue where the risk and risk category columns in the access rules table displayed null values | X | X | X | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Improved both the parser logic and support for Cisco, Juniper, and Panorama devices | X | X | X | X |
| Enhanced the arrange button functionality to realign and display devices in a more user friendly visualization | X | X | X | X |
| Updated background task logic to calculate and display a more accurate reflection of the percent complete for a task that is processing | X | X | X | X |
| Enhanced smart search functionality to highlight unmapped nodes after a search for them is executed | X | X | X | X |
| Improved the import process to resolve the anomaly related to auxiliary data not saving when included in custom views | X | X | X | |
| Enhanced the import process to resolve the anomaly related to device interfaces being misappropriately excluded | X | X | ||
| Resolved an issue where users could not view Access Rules data within the info panel when installing NP-Live with Radius authentication | X | X | ||
| Improved the connector logic and support for Checkpoint R80 devices | X | X | ||
| Resolved an issue where no path details were displayed when reviewing inbound connectivity through a zone | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Updated NP-View Essential Desktop to include correct compliance module based on license key | X | |||
| Fixed an issue where the compliance framework did not appear when creating a new workspace after NP-View Desktop was restarted | X | |||
| Enhanced false positive risks/warnings displayed for Palo Alto Intrazone Routing | X | X | X | X |
| Fixed an issue where the Workspace Report displayed internal names instead of interface names for the binding/source/destination and service columns in the Access Rules section | X | X | X | X |
| Fixed an issue where the size of the devices was difficult to view on the topology map due to an auto zoom out in existing workspaces | X | X | X | X |
| Fixed an issue where importing Palo Alto configuration files was displaying duplicate devices | X | X | X | X |
| Improved parser and categorizer support for Panorama interfaces | X | X | X | X |
| Fixed an issue where the topology map was not centered when exporting the topology map to Visio or pdf | X | X | X | X |
| Fixed an issue where the incorrect nodes were displayed for device interfaces | X | X | X | X |
| Fixed an issue where the radial buttons to unpin/pin, collapse, and arrange peers did not appear after clicking on a specific node | X | X | X | X |
| Added Best Practice Report to the Summary Report function within the NERC-CIP and PCI Workspaces when the Best Practice Module is licensed | X | X | X | X |
| Enhanced view menu panel functionality so that it no longer auto closes after saving an edited custom view | X | X | X | X |
| Enforced naming parameters when creating/renaming custom views, workspaces, and zones | X | X | X | X |
| Fixed an issue where zone criticality colors were misapplied to Auto Generated Zones | X | X | X | X |
| Fixed the Panorama configuration file notification messaging that previously indicated to users 0 devices were imported to now indicate and display the successfully imported devices | X | X | X | X |
| Improved Panorama configuration file parsing to optimize the display of the correct device names | X | X | X | X |
| Fixed an issue where unconfigured vsyses Panorama firewalls were not being filtered out and displaying as additional devices on topology map | X | X | X | X |
| Removed hostname column from Asset Inventory | X | X | X | X |
| Fixed an issue where the display of the count of the number of dependents under a given network within the info panel was incorrect. | X | X | X | X |
| Fixed an intermittent issue where importing configuration files over 20 MB caused the application to lag and not execute import processes | X | X | X | X |
| Added SMB-Legacy and SSH connectors | X | |||
| Fixed an issue where connectors were not functioning as expected after resolving all previously identified errors | X | X | ||
| Added the Field Names (listed below) to the SSH Connector Type. These include: Path on Remote Host, Authentication, File name include filter, File name exclude filter and File Description Key | X | X | ||
| Increased the width of the display bubble that shows Checkpoint and FortiManager connector types so that text no longer exceeds past the end of bubble | X | X | ||
| Resolved an issue where on demand connectors were rerunning upon server restart | X | X | ||
| Enhanced connector related authentication | X | X | ||
| Fixed an issue that was resulting in connector errors when a user clicked either the test connector, test credentials, or retrieve device list buttons during set up | X | |||
| Resolved an issue where a false positive warning message displayed within the new connector setup window and indicated that no device list was retrieved upon creating a Panorama connector | X | |||
| Improved messaging that indicates successful connection when adding a new connector and testing connector credentials | X | |||
| Fixed an issue where clicking on “Generate NERC CIP Report” now displays the report in the same tab and no longer in a new one for NP-View Server Tab | X | |||
| Fixed an issue where the ability to add comments to devices with no comments was previously disabled when comparing data in Access Rules | X | |||
| Fixed an issue where not all Default Policies and Table Highlighting dropdown options were appearing within Policy Manager | X | |||
| Fixed an issue where the topology map did not update when adding a new connector within a new workspace | X | |||
| Fixed an issue where clicking the escape button did not close the Policy Management screen | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Increased the view limit from 1 to 15 to NP-View Essential | X | |||
| Resolved an issue where the Export function was missing on the Essential/Professional desktop edition in 4.0.0 | X | X | ||
| Rebranded the naming of the diagnostic download files from NP-Live to NP-View | X | X | X | X |
| Resolved miscellaneous issues in the NERC-CIP Wizard | X | X | X | X |
| Improved the usability of the workspace page; disable Add Workspace button when limit has been reached and provide error message when limit has been reached | X | X | X | X |
| Added title to ALL table components in the NERC-CIP Reports when exporting to Excel | X | X | X | X |
| Resolved an issue where the NERC-CIP Wizard displayed mismatching data | X | X | X | X |
| Resolved an issue where the Auto Generate Zones doesn’t work | X | X | X | X |
| Updated the Category color for “CIP: Protected Cyber Asset” from red to orange | X | X | X | X |
| Resolved an issue where multiple interfaces had the same IP Address when running the NERC CIP Wizard | X | X | X | X |
| Resolved an issue where updating licenses is not updating with the new license data | X | X | X | X |
| Resolved issues with the SolarWinds Connector Device List | X | X | ||
| Resolved an issue with the Splash Page on NP-View Desktop 4.0.0 missing logo | X | X | ||
| Removed the Compared Results column from Access rules table due to new comparison function | X | X | X | X |
| Resolved an issue where importing a NP-View Java project with customized fields, where missing after import into NP-View | X | X | X | |
| Improved the usability of the NERC-CIP Report; fixed blank web pages and console errors | X | X | X | X |
| Resolved an issue where the Sidebar was stuck in loading after a new local install on a new workspace | X | X | ||
| Resolved an issue where user could not create a custom view from selection (right click) | X | X | X | |
| Resolved an issue where labels added where stacking on top of each other during NERC-CIP wizard process | X | X | X | X |
| Resolved an issue where the Enterprise license can’t create additional views | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Resolved an issue where the NERC-CIP report had an issue loading the EACMS section. | X | X | X | X |
| Resolved an issue where the NERC-CIP Wizard displayed mismatching data. | X | X | X | X |
| Resolved an issue with the license downgrade function on Windows desktop. | X | X | ||
| Resolved an issue where the Viewer role could change category tagging. | X | X |
| Bug Fixes, Enhancements | Essential Desktop | Professional Desktop | Professional Server | Enterprise Server |
|---|---|---|---|---|
| Added MAC categorization support | X | X | X | X |
| Added parser and categorizer support for transparent cisco interfaces | X | X | X | X |
| Added parsing support for Transparent Firewall format of Cisco MAC Table | X | X | X | X |
| Added support for “fortilink” protocol to depict layer 2 | X | X | X | X |
| Added the ability to rename views | X | X | X | X |
| Added the ability to rename workspaces | X | X | X | X |
| Improved the “Created by and Updated by” fields in the Asset Inventory table to reflect the source file names. | X | X | X | X |
| Improved the selection of devices on the topology to add Ctrl for single device selection | X | X | X | X |
| Improved the usability of the Access Rules and Object Groups reports | X | X | X | X |
| Improved the Workspace and Best Practice Summary Reports to reflect the current view | X | X | X | X |
| Redesigned the NERC-CIP report and wizard | X | X | X | X |
| Resolved a ‘bool’ object has no attribute ‘keys’ attribute error for Juniper | X | X | X | X |
| Resolved a Regex issue with Risks and Warnings default policy | X | X | X | X |
| Resolved an issue for Palo Alto SERVICE group translation | X | X | X | X |
| Resolved an issue where .NPV files failed to load | X | X | X | X |
| Resolved an issue where Cisco routing tables were not matching routes | X | X | X | X |
| Resolved an issue where conditional formatting was not being run after import of .NPV file. | X | X | X | X |
| Resolved an issue where disconnected topology assets would be repositioned on data update | X | X | X | X |
| Resolved an issue where rerunning conditional formatting was not updated the modal reports | X | X | X | X |
| Resolved an issue where rulesets have ambiguous association of BINDING groups to INTERFACE for PanOS | X | X | X | X |
| Resolved an issue where the Risks And Warning were not showing on the Best Practice report | X | X | X | X |
| Resolved an issue where the system allocated another license if the device name is changed. | X | X | X | X |
| Resolved several issues with the comparison reporting function | X | X | X | X |
| Released NP-View Essential | X | |||
| Resolved an issue where renaming objects in Custom views was not sticky | X | X | X | |
| Rebranded NP-View II to NP-View Professional Desktop | X | |||
| Resolved an issue where Panorama files loaded into workspace using NP-Connect were causing workspace errors | X | X | ||
| Resolved an issue where the Panorama connector device list was not showing all of the devices | X | X | ||
| Resolved an issue where the Retrieve device list” window title shows “Connector error”, even when successful | X | X | ||
| Resolved an issue where topology maps for Workspaces transferred between users fail to load | X | X | ||
| Resolved an issue where connectors were pulling files not in the path and not updating until the next manual pull | X | X | ||
| Resolved an issue where the creation date of a cloned connector does not update when saved | X | X | ||
| Resolved multiple issue where the SMB connector failed to authenticate | X | X | ||
| Rebranded NP-Live to NP-View Professional Server | X | |||
| Released NP-View Enterprise Limited Preview | X |
By subscribing, you agree to our Privacy Policy and consent to receive updates from us.